Parking Sensor System
:> Insta llatlon
of
recess sensors
It Is required to make holes on bumper for recess sensors.
•
Installation direction of sensors
Follow the
•uP""
mark on sensors and Insert sensors Into the
holes made In bumper as Fig. 30 shows.
•
About angle for installing sensors
The central axis
of
sensor should be perpendicular to bumper
surface. See Fig. 31.
•
Horizontal and vertical positioning
See Ag. 32 and 33,
•Lw
Is the width of vehlcle. The horlzontal
distance between sensors Is decided by the width of vehlcle. It Is
recommended to install the side sensors slightly closer to the
lateral sides
of
vehicle for wider detection angle, when needed.
n719
1/4L
1/4 L
214
L
0.3-0.4m
L
•
Installing steps
•
Marie with a pencil the installing positions for sensors on
bumper.
•
Make holes one by one with a drill and the Included drlll bit.
Before that, it is recommended that sma lier holes are made with
a M 2 drlll bit, for better positioning of sensors
