Ameba-D Application Note
Application Note All information provided in this document is subject to legal disclaimers. © REALTEK 2020. All rights reserved.
13
Fig 1-18 Downloading log
(5)
You can also erase all parts of the Flash memory if necessary.
Fig 1-19 Erasing Flash memory
1.3.4
IAR Debug
You can debug or trace KM0 and KM4 system individually with J-Link or RLX Probe SWD.
Note:
Considering KM4 is power-on by KM0, you should make sure that KM0 has already boot up before debug KM4. For KM0, there is no such
requirement because KM0 is power-on immediately after reset.
