RealMan (Beijing) Intelligent Technology Co., Ltd.
60
name: RM75-B, WIFI password: 12345678, communication port: 8080,
communication mode: server.
8.4.1.2 WIFI STA Configuration
The controller can switch to WIFI STA mode to connect to the router specified by the
user. The network name is the router name to be connected to by the specified controller,
and the network password is the specified router password. After the completion of
configuration, the controller communicates with the outside in WIFI STA mode
immediately. In this mode, the IP of the controller is automatically assigned to the router,
the communication port number is 8080, and the communication mode is server.
8.4.1.3 Ethernet Mode
When the teaching software and the controller need to be connected directly through
the Ethernet port, the controller will communicate through the Ethernet port 2. IP
address: 192.168.1.18, port number: 8080, and communication mode: server. The
following figure shows the position of Ethernet port 2, and the communication rate is
100M.
Fig. 8-41 The controller panel.
Local network configuration: The default IP address of the controller is 192.168.1.18
when the teaching software starts. But when the controller switches to WIFI STA mode,
the IP of the controller is automatically assigned to the router, and then the teaching
software needs to reconnect the controller. The target IP is the IP address newly assigned
to the controller, and the port number is 8080. After editing, click “Configure” to load
the new network information of the controller into the teaching software.
WIFI/
蓝牙
天线
扩展插头
电源插头
USB
接口
1
USB
接口
2
网口
1
网口
2
电源开关