RealMan (Beijing) Intelligent Technology Co., Ltd.
10
installation angle, weight in TCP, TCP offset, safety configuration
etc.). Save the installation file and load it into the program.
6. Tools and obstacles shall not have sharp corners or twist points.
Make sure present users’ head and face are out of reach of the robot.
7. Pay attention to the movement of the robot when using the teaching
software.
8. Any collision will release a lot of kinetic energy, which is much
larger than the cases of high speeds and high payloads.
9. Jointing different machinery can exacerbate a hazard or create new
ones. Always conduct a comprehensive risk assessment for the entire
installation. When different safety and emergency downtime
performance levels are asked, always select the highest performance
level. Please read and understand the manuals for all equipment used
during the installation.
10. Do not modify the robot. Non-authorized changes to the robot can
create dangers that the integrator cannot predict. The authorized
change of robot shall be in accordance with the latest version of
relevant service manuals. If the robot is manipulated or altered in any
way, we, as RealMan (Beijing) Intelligent Technology Co., Ltd., do
not take full responsibility.
11. Users need to check insulation and protection measures before
transporting the robot.
12. When moving the robot, follow the transportation requirements
and handle it carefully to avoid bumps.
1. When a robot is connected to or collaborating with machinery that
can cause damage to the robot, it is highly recommended that all
functionalities and procedures of the robot should be checked
separately. It is recommended to use a temporary workspace outside
of the workspaces of other machinery to inspect the robot program.
2. We, as RealMan (Beijing) Intelligent Technology Co., Ltd., will
not be liable for damage to the robot or personal injury caused by
