4.
At the garage door opener receiver (Control Housing) in the garage,
locate the Learn button. If there is difficulty locating the Learn button,
please reference the garage door opener’s manual.
5.
Press and release the Learn button (which activates the “Radio” light)
NOTE:
Once the button is pressed, there are approximately 10 seconds in
which to initiate the next step.
6.
Return to the vehicle and firmly press and hold the desired HomeLink
button to be programmed for two seconds and release. Repeat the
“press/hold/release” a second time to activate the door.
(You may need to repeat this sequence of pressing the Learn button on
the Control Housing and then pressing the HomeLink button in the vehicle
up to 3 times to complete the training process).
7.
HomeLink should now activate your rolling code equipped opener.
1.
From the main screen please select: Car – Car Systems – Vehicle
Settings – Garage Door Opener – Clear Programming Settings – Yes.
2.
Please wait until the HomeLink LED turns off.
3.
Press and hold the middle button for approximately 20 seconds,
releasing only when the HomeLink LED shows a constant light. (Please
ignore the message: “Program button 2 now?”)
A second person may make the following steps quicker & easier. As a
safety precaution, DO NOT stand on your vehicle. Use a stepladder or
other stable, safe device.
4.
At the garage door opener receiver (Control Housing) in the garage,
locate the Learn button. If there is difficulty locating the Learn button,
please reference the garage door opener’s manual.
5.
Press and release the Learn button (which activates the “Radio” light)
NOTE:
Once the button is pressed, there are approximately 10 seconds
in which to initiate the next step.
6.
Return to the vehicle and firmly press and hold the desired HomeLink
button to be programmed for two seconds and release. Repeat the
“press/hold/release” a second time to activate the door.
(You may need to repeat this sequence of pressing the Learn button
on the Control Housing and then pressing the HomeLink button in the
vehicle up to 3 times to complete the training process).
7.
HomeLink should now activate your rolling code equipped opener.
ALTERNATE AUDI, PORSCHE, & VW MMI INSTRUCTIONS
44 HOMELINK
TR
OUBLESHOO
TING
43 HOMELINK
TR
OUBLESHOO
TING
