www.ReadyLIFT.com
-
Phone: (877) 759
-
9991
17
44
-
19620
-
IM
-
AA
Install the rear differential drop onto the
rear factory differential mounting point
using the using the supplied M12 x 35mm
bolts, nuts and washers.
Do not tighten at this time.
NOTE: Due to minor differences between
trucks, it may be necessary to grind the
webbing on the mount to clear the new
drop bracket.
Before tightening the passenger side rear
differential drop, ensure the large notch is
orientated up and against the factory
differential mounting point.
Ensure the offset is toward the front of
the vehicle.
Raise differential into place. Be sure to
use a helper to aid in the installation
process. With the differential in place,
install the provided M12 x 60mm bolt,
washers and nut through the driver side
inner differential drop bracket, the diff
drop spacer, the differential housing, then
the driver side outer differential drop
bracket.
Do not tighten at this time.
