23
Alert
indication
LED is lit
Short circuit.
The alert indication LED on
the hand control is lit.
Service is needed.
Duty cycle protection Duty cycle protection is a
function to protect the
actuator motor from
overheating.
The alert indication LED on
the hand control
is lit during
attempt to run the actuator.
Wait until the actuator “rest
time” has elapsed.
Internal error.
The alert indication LED on
the hand control is lit.
Wait 10 s. If the error
remains, service is needed.
Charger connected
while trying to run
actuator.
The alert indication LED on
the hand control is lit.
Disconnect the charger.
No
Charging
Charger cable not
connected to control
box or wall socket.
The LED on the charger and
the LEDs on the hand
control are not indicating
charging.
Make sure the cable is
properly connected to the
control box and wall socket.
Damaged battery
Charger connected for
several hours, but no
charging indication.
Service is needed.
7.1 Repairs
To avoid risk of malfunction, all repairs must be carried out by authorized REAC workshops or by a REAC
appointed representative. Products under warranty must also be returned to an authorized REAC
workshop.
Do not open the product. Damage to the product can occur.
