re3D GIGABOT 3+, Quick Start Manual, Page: 14 / 32

IMAGE BOX:
Option A.
1. Place Image
2. Sent to Back
IMAGE BOX:
Option A.
1. Place Image
2. Sent to Back
IMAGE BOX:
Option A.
1. Place Image
2. Sent to Back
Using the Viki LCD controller, move the bed
down 150mm. Press the button to see the
main menu, then select “Prepare,” scroll down
to “Move Axis,” then “Move 1mm,” then “Move
Z,” and finally turn the wheel clockwise until it
reaches 150mm.
14
B1
Using the 8mm combination wrench, loosen
each of the 2 M5x12 hex head screws that
fasten the bed side plate to the bed cross rails.
There are 8 in total.
B2
These need to be loose enough so that the
ends of the rails can move vertically in the
slots of the side plates with little to no
resistance.
B3