re3D GIGABOT 3+, Quick Start Manual, Page: 11 / 32

IMAGE BOX:
Option A.
1. Place Image
2. Sent to Back
IMAGE BOX:
Option A.
1. Place Image
2. Sent to Back
IMAGE BOX:
Option A.
1. Place Image
2. Sent to Back
11
A7
Locate the Viki at the back of the Gigabot
®
3+
near the electrical box and remove all
packaging from the Viki. With a 4mm Allen
wrench, unscrew the three screw in the back
upright rail and use the screws to attach the
Viki to the rail.
A8 **IMPORTANT**
Remove all 8 (eight) bed locks
using the 8mm wrench. Note that
these are both above AND below
the bed frame. Save these bed
locks in the event that you need to
transport your
Gigabot
®
3+ in the
future.
A9
Insert the socket end of the power cable into
the electrical box. Check that the connection
is secure.