
3
1
Using This Guide
1.1
Purpose
This guide covers P132-based RDS encoders (both module and boxed versions). It provides the information needed to install the equipment
and set basic RDS services in order to get your station RDS enabled quickly in a few steps.
Please read this entire guide and familiarize yourself with the controls before attempting to use this equipment.
Where not otherwise indicated, any information mentioned in relation to the
RDS
(Radio Data System) applies in full also to the
RBDS
(Radio
Broadcast Data System).
If you have any questions or comments regarding this document, please contact us via email.
We welcome your feedback.
1.2
Additional Documentation
Browse the installation CD or visit the Website for the latest documentation version and the following additional documentation:
P132 RDS Encoders - Communication Ports and Internet Functions (
http://pira.cz/rds/p132com.pdf
P132 RDS Encoder Technical Manual (includes troubleshooting on the last page) (
http://pira.cz/rds/p132man.pdf
Magic RDS Help
Magic RDS Guide – How to... (
http://pira.cz/rds/show.asp?art=magic_rds_how_to
Support section (
http://pira.cz/rds/show.asp?art=rds_encoder_support
X-Command for RDS Encoders (
1.3
Disclaimer
The equipment has been thoroughly tested and found to be in proper operating condition when shipped. The manufacturer is not liable for any
damages, including but not limited to, lost profits, lost savings, or other incidental or consequential damages arising out of the use of this product.
No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording
or information storage and retrieval systems, for any purpose other than the purchaser's personal use.
Information in this document is subject to change without notice.
Revision 2018-10-07
Copyright © 1999-2018 PlRA DigitaI s.r.o.