RDS P132 Quick Installation Manual Download Page 17

 

17 

 
 
 
Basic data format for ASCII command is as follows: 
 
Prefix (ASCII command):  RT1= 
Terminating character 

 

:  <CR> (Carriage return). <CR><LF> accepted as well. 

 
Example: 

RT1=Now Playing: Julia Michaels - Issues

 

 
See the Technical manual for complete list of all ASCII commands. 
 
 

5.2.3

 

Compatibility commands 

 

To reach the best possible compatibility with broadcast automation systems, the P132 includes a special set of compatibility commands. In the 
systems where the P132 is not directly supported (or the system is older version) the user may try to select another RDS encoder model to 
send text messages. Where possible, set the communication as unidirectional. 
 

Command 

Translated to 

TEXT= 

RT1= 

DPS= 

DPS1= 

PS_SCROLL= 

DPS1ENQ= 

 
 

5.2.4

 

Radiotext Plus (RT+ tagging) 

 
The RT+ feature is designed to let the listener take additional benefit from the Radiotext service by enabling receivers to offer direct access to 
specific elements of Radiotext. Typically the RT+ feature supports song artist and song title elements. These elements anyway carried in the 
Radiotext, are identified by their class type, length and location within the Radiotext. The receiver must be equipped with the RT+ function (also 
called "tagging") to take advantage of this feature. 
 
The RDS encoder includes full support for the RT+ and its handling is highly automated. For direct use your broadcast automation system must 
support X-Command or the RT+ function either by means of user defined groups or by the command 

RTP=

. In other cases the Windows 

control software used in the indirect link configuration can provide the RT+ service.  
 
 

5.2.5

 

X-Command for RDS encoders 

 
The X-Command is the newest and preferred method of forwarding text information (incl. tagging) from the broadcast automation system to the 
RDS encoder. It is based on simplified markup language. The X-Command is fully supported by the P132 RDS Encoder. 
 
Example: 

XCMD=<rds><item><dest>3</dest><text>Now Playing: <artist>Julia Michaels</artist> - 
<title>Issues</title></text></item></rds>

 

 
For more details follow the information in the document 

‘X-Command for RDS Encoders’

 

 

Summary of Contents for P132


















Reviews: