12
4.3
Device Setup
4.3.1
Device Setup from Magic RDS
Open the Device Setup dialogue box (RDS Encoder – Device Setup). If previous steps have been done right, you’ll see the following window:
Here’s the port setup, Ethernet setup and UECP setup at one place. A description of each item follows:
Port 1
Port speed
Setting the Port 1 speed is required to maintain compatibility with older software or terminal
application. Due to virtual COM port included in the USB driver the older software can access
the RDS encoder the same way like in case of standard serial port.
Default speed is 2400 bps.
Embedded Web-Server Control (Port 2)
Port number
Specifies the embedded web-server port number.
Default port number is 80. Such number may be omitted when typing the URL in web browser.
Password
If a password is filled, it is required in order to enable any configuration changes using the
embedded website.
Default password is * (that means ‘no password required’).