RDM synergy II, Installation Manual, Page: 13 / 32

II. Insert the Franking Roller Cartridge
into the Printer Assembly:
1. Drop the franking roller straight into the printer
assembly.
2. Apply pressure to the widest part of the flat top
until the roller clicks into place.
3. Replace the document feed plate by pressing down
firmly until it clicks into place.
4. Close the imaging frame.
5. Close the outside cover.
CAUTION:
ƒ Ink may be harmful if swallowed.
ƒ Avoid contact with eyes.
ƒ Damage to the unit or the roller resulting from
modifying the roller is not the responsibility of RDM.
ƒ Intended for single use only.
ƒ Not licensed for modifications.
ƒ RDM may change product designs, features or
specifications at any time.
11