15
Default Sound Signals:
Several conditions are also signaled by a pattern of tones in addition to the LED display:
Tone
Meaning
One short beep
LED is flashing green
The unit was
successful
in reading the MICR line.
Three short beeps
LED is flashing red
The unit was
not successful
in reading the MICR line.
One long beep
LED is flashing red
An
error
occurred during processing or storing of the captured image.
A Typical Check Processing / LED Cycle:
1. The unit is on and idle…the LED is
Solid Amber
.
2. The LED turns to
Solid Green
when the scanner is ready to accept a check.
3. A check is run through the unit…the LED turns OFF (3-4 seconds) then
Flashes Green
. The
unit emits a short “beep” sound.
4. The LED returns to
Solid Amber
when the transaction is complete.