Door control
FireProV2
Manual
Please keep this manual with attachments carefully!
10
7.5
Photocell protection:
The Photocell protection works only with normal operation. The door will
stop and then go back
open.
7.6
Light curtain:
It is possible to connect a PNP, SSR OR OSE
light curtain To the FirePro, and use it as an safety
edge.
7.7
Escape button:
There is a possibility to connect a escape button with which the door in the event of a fire alarm or
smoke detection will open to be able to escape (only if the mains power is still present ). The door
will then close again to a set time. It is also to be set that the door can still be opened with the
Open button and when releasing it the door closes again immediately (when the mains supply is
still present ). In the case of smoke detection, the door/shutter can no longer be opened if it is
completely closed, unless it is chosen to partially open the door.
7.8
Maintenance Cycle:
A maintenance cycle can be activated in the menu. If it is activated and the number of set cycles is
reached, the LED turns red and green alternately. A CS notification appears on the display (see
page 36).
When interrupting the calamities /fire alarm-contact or if the batteries are low (and
the Close option is selected), the door/roller shutter automatically closes and this can
be without safety protection!
Make sure that the batteries are never discharged completely. If the batteries are
discharged completely, they can no longer be reused. Replace the batteries.
Disconnect the battery connection if the controller is not in use.
Each year, replace the batteries preventively during maintenance.
