background image

ONYX2 Owner's Manual 

27 

RSF Woodburning Fireplaces 

 

LIMITED WARRANTY 

 

30 Years Limited Warranty 

 

All RSF Woodburning Fireplaces models are warranted against defects in material and workmanship for a 
period of 30 years, subject to the following conditions: 

During the first year 

RSF Woodburning Fireplaces

 will repair or replace, at our option, any parts which upon 

examination by an authorized 

RSF Woodburning Fireplaces

 representative, are found to be defective, except 

the parts listed in the EXCLUSIONS portion of this warranty. 

RSF Woodburning Fireplaces

 will also pay 

reasonable labor costs for the repair work. 

During the second through fifth years 

RSF Woodburning Fireplaces

 will repair or replace, at our option, any 

parts which upon examination by an authorized 

RSF Woodburning Fireplaces

 representative, are found to be 

defective, except the parts listed in the EXCLUSIONS portion of this warranty. 

RSF Woodburning Fireplaces

 

shall not be responsible for any labor costs associated with this repair work. 

During the sixth through thirtieth years 

RSF Woodburning Fireplaces

 will provide replacement parts, if available, 

at 50% of the published retail price, except for the parts listed in the EXCLUSIONS portion of this warranty. 

RSF 

Woodburning Fireplaces

 shall not be responsible for any labor costs associated with this repair work. 

EXCLUSIONS: 

 

Electrical components are warranted for one year only. 

 

Glass and plating. 

 

Damage due to normal wear and tear, such as paint discoloration, worn gaskets, eroded or cracked refractory 
components. 

 

Repairs or replacements necessitated by vandalism, neglect, abuse, over-firing, improper fuel or fuel loads, or 
failure to adequately service the unit, as stated in the owner’s manual. 

  Repairs or replacements (particularly charges for travel and labor) not authorized by 

RSF Woodburning 

Fireplaces

 in advance. 

LIMITATIONS: 

 

All items found to be defective will be replaced or repaired upon return of the defective part to an authorized 

RSF Woodburning Fireplaces

 dealer. 

RSF Woodburning Fireplaces

 will not be responsible for freight 

costs related to shipping replacement parts. 

 

Any complete fireplace, or part thereof, that is replaced or serviced under this warranty, will be warranted for a 
period not exceeding the remaining term of the original warranty. 

 

This warranty is not transferable. 

 

This warranty does not apply to damage to the appliance while in transit. 

 

This warranty does not apply if the installation does not conform to the installation requirements in the owner’s 
manual. 

RSF Woodburning Fireplaces

 is free of liability for any damages caused by the appliance, as well as material 

and labor charges incurred in the removal or re-installation of any 

RSF Woodburning Fireplaces

 fireplace under 

this warranty. Incidental or consequential damages are not covered by this warranty. 

The remedies set forth herein are exclusive, and the liability of the seller shall not exceed the price of the fireplace 
or part thereof upon which the liability is based. 

This warranty is expressly in lieu of all other warranties expressed or implied, including the warranties of 
merchantability and fitness for use and all other obligations or liabilities on the part of 

RSF Woodburning 

Fireplaces. 

 

Summary of Contents for ONYX2




























Reviews: