RCF spa
M 20X Digital Mixer Reference Guide
7
4. MIX Outputs 9-10 TRS
Connect to these +24dBu balanced TRS outputs your stage monitors or external effects.
5. POWER
Use this switch to turn On and Off your M 20X device. Connect to the VDE inlet the provided power cord.
6. MAIN OUTUT
Connect your active speaker or your amplifier, in case of passive speakers, to these +24dBu balanced Output.
7. LAN PORT
The mixer can be remotely controlled via LAN, and an external Wi-Fi Access Point can be connected to the LAN port
to communicate with remote control apps running on iOS and Android.
8. USB AUDIO PORT
A 24-track. 24-bit, 48-kHz audio interface is available and allows access to all inputs and several internal signal nodes.
Extensive routing options allow both offline sound check and host-based effects processing.
9. AES DIGITAL OUTPUT
Connect here any AES/EBU device. Each of the audio output paths is routable to the AES/EBU port.
10. LINE INPUTS 17-18 TRS
Connect here your line level sources like keyboard, external audio device or other small analog consoles used for
submix.
