RCF spa
M 20X Digital Mixer Reference Guide
26
CHANNEL VIEW parameters assigned to the Encoders are:
8-Band PARAMETRIC EQ
All outputs are equipped with an 8-band Parametric EQ that allows an accurate equalization of signal output and that
can be configured in various operating modes: the first two and last two bands have selectable filter types, and they can
be combined into a single, 24-dB/oct HPF or LPF. This also allows for crossover filtering, useful in combination with the
extensive routing capabilities, when a subwoofer is connected to one of the MIX outputs.
SEND SEL: this parameter allows to select the send-on-mix block:
Send to APFL (for LR and MIX outputs)
Send to LR (for MIX outputs only)
PRE/POST: this parameter allows to select if the selected send-on-mix is Pre or Post Fader
ON/OFF: this parameter allows to enable or disable the selected send-on-mix
DELAY: this parameter set the value of the input Delay time in the range [0: 250] ms
Encoder
parameters
change
according
to the selected band
Select band moving
Encoder 2
Switch
the
PEQ On or Off
using the on-
screen
ON
button
Touch
these
boxes to select
a band and
automatically
assign last 3
encoder to the
related
parameters
Reset the EQ parameters
using the INIT button
Viewing
Area
For the output Parametric EQ, 100
locations are available where your custom
settings can be saved and recalled
ZOOM
View
allows a more
accurate setting
of the equalizer
curve using touch
screen
