RCF M 20 Series, Reference Manual

Page: 16 / 60

RCF spa M 20X Digital Mixer Reference Guide 16
The CHANNEL parameters assigned to the Encoders are:
Input channels 17-20
Hardware inputs from 17 to 20 have line connections, with no Phantom option and with the preamp gain parameter in
the range [0: 10] dB.
IN SOURCE: this parameter allows to select the source type between these items:

ANALOG: Mic Input

STREAM: 24-track USB audio interface

SD CARD: 20-track Player
GAIN: this parameter set the value of the input gain accordingly to the selected input source

ANALOG: range [0: 60] dB with step of 1 dB

STREAM: range [-10: 10] dB with step of 1 dB

SD CARD: range [-10: 10] dB with step of 1 dB
HPF FREQ: this parameter set the value of the HPF cutoff frequency in the range [20: 1k] Hz
DELAY: this parameter set the value of the input Delay time in the range [0: 100] ms
Input channels 19-20 have an additional
item in the Source Selector. Besides Analog,
Stream and SD Card source, it’s possible to
select USB Stereo Player as input.
IN SOURCE: this parameter allows to select the source type
between these items:

ANALOG: Mic Input

STREAM: 24-track USB audio interface

SD CARD: 20-track Player

DRIVE: USB Stereo Player (for CH19-20 only)
GAIN: this parameter set the value of the input gain
accordingly to the selected input source

ANALOG: range [0: 10] dB with step of 1 dB

STREAM: range [-10: 10] dB with step of 1 dB

SD CARD: range [-10: 10] dB with step of 1 dB

DRIVE: range [-10: 10] dB with step of 1 dB