Chapter 1: Before You Begin
Chapter 1
15
LyraDJ
LyraDJ is software that can easily generate playlists for you, after analyzing the acoustic characteristics of your songs, the software will create sets of related
content that you can listen to and enjoy.
Important Note
:
1. LyraDJ will only work with mp3 fi les.
2. LyraDJ will only work with fi les that are on the Lyra Recorder.
3. LyraDJ will only work on fi les in a folder called Music.
4. LyraDJ will only work in MSC (Mass Storage Class) USB protocol mode. The Lyra Recorder’s default is set to MTP, so you’ll need to
change the setting if you want to use LyraDJ. In the Setup menu, select USB Protocol and change the setting to MSC. See page 23.
Also, see page 55 for more information on USB protocols.
Multiple level sub folders under the Music folder are allowed and recommended for optimum device performance and ease of fi nding
content. For example D:\Music\Artist1\Album1\Song1.mp3
1. Start
LyraDJ.
2.
The software will ask you to connect the Lyra Recorder to the computer via USB
cable.
3.
Click Analyze to start analyzing songs in the Lyra Recorder.
4.
Make sure the Lyra Recorder has at least 64 songs or else the software will not be able
to generate a playlist.
5.
When the analysis is completed, the software will create playlists (the number of
playlists created will vary, depending on the total number of songs stored in the Lyra
Recorder), you can save these playlists into the Lyra Recorder.
6.
For more information about Lyra DJ, click Help at the top right corner.
