11
OPERATION
(continued)
3. If the headphone volume is not sufficient, adjust the source volume.
4. If distortion occurs, reduce the volume on the source component.
Fixed Volume Output.
When using an audio source with a fixed
volume output, regulating the volume can be achieved through the
headphone
VOLUME
control (6) only. Examples of fixed volume
outputs are RCA jacks (VCR, Tape, Video or CD outputs).
TROUBLESHOOTING
Refer to this troubleshooting section if you encounter any difficulties in
setting up and using your headphones.
PROBLEM
SOLUTION
No sound heard
• Check that your audio source, cradle/transmitter
through the
and headphones are connected, supplied properly
headphones
and turned on.
• Check to ensure that the rechargeable batteries are
installed in the headset correctly and have been
recharged properly.
• Check to ensure the cradle/transmitter is running and
the audio signal LED indicator light (9) on the unit
is lit.
• Check that the audio source is delivering a
sufficient signal to the cradle/transmitter through
the audio input cable (13). Use the
VOLUME
control (6) to increase the sound level.
• Check that the headphone and transmitter are set
to the same channel.
Poor sound
• Check to ensure that the sound provided by the
quality or
audio source is loud enough and of sufficient quality.
interference
Make sure the stereo LED indicator light (5) is lit.
• Check if the batteries in the headphones have
sufficient power. Recharge or replace them,
if necessary.
• Check to see if you have selected the best
transmission channel (1, 2, or 3) to provide the
optimum signal reception. If necessary, try
another channel on both the headphones (7) and
the cradle/transmitter (12).
• Check if the distance between the headphones
and the cradle/transmitter is within the operating
range. (The effective range of this device is
approximately 150ft/45m.*) Move closer to the
cradle/transmitter to receive the sound.
• Check that the audio source provides stereo sound.
TROUBLESHOOTING
(continued)
PROBLEM
SOLUTION
Power cut off
• The cradle/transmitter has an automatic power off
function. When no signal is received through the
cradle/transmitter’s audio input cable, it switches
off. Switch on your audio source again, and use the
CHANNEL
switches (7 & 12) to adjust reception.
If necessary, increase the audio source’s volume.
SPECIFICATIONS
Model
WHP141
Description
Radio Frequency
Wireless Headphone System
Transmitter
Carrier Frequency
900 MHz
Effective Range
Up to 150ft/45m–
Power Supply
12V 150 mA
Transmission Frequency
UHF – 900 MHz/three channels:
912 MHz (1), 912.5 MHz (2), and 913 MHz (3)
Headset Power Supply
Two AAA type 1.2V NiMH rechargeable
batteries included
12 MONTH LIMITED WARRANTY
.t
n
e
m
n
o
r
i
v
n
e
y
b
y
r
a
v
y
a
m
e
g
n
a
R
.t
n
e
m
n
o
r
i
v
n
e
y
b
y
r
a
v
y
a
m
e
g
n
a
R
*
10
WHP141 US IB REVC_K.qxd 4/25/07 1:17 PM Page 10
Audiovox Electronics Corporation (the “Company”) warrants to the original retail purchaser of this
product that should this product or any part thereof, under normal use and conditions, be proven
defective in material or workmanship within 12 months from the date of original purchase, such
defect(s) will be repaired or replaced (at the Company’s option) without charge for parts and repair
labor. To obtain repair or replacement within the terms of this Warranty, the product along with
any accessories included in the original packaging is to be delivered with proof of warranty coverage
(e.g. dated bill of sale), specification of defect(s), transportation prepaid, to the Company at the
address shown below. Do not return this product to the Retailer.
This Warranty is not transferable and does not cover product purchased, serviced or used outside the
United States or Canada. The warranty does not extend to the elimination of externally generated
static or noise, to costs incurred for the installation, removal or reinstallation of the product. The
warranty does not apply to any product or part thereof which, in the opinion of the company, has
suffered or been damaged through alteration, improper installation, mishandling, misuse, neglect,
accident or exposure to moisture. This warranty does not apply to damage caused by an AC adapter
not provided with the product, or by leaving non-rechargeable batteries in the product while
plugged into an AC outlet.
THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE
REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY’S
LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT. This
Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES,
INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, SHALL BE LIMITED TO DURATION OF THIS WARRANTY. ANY
ACTION FOR BREACH OF ANY WARRANTY HEREUNDER, INCLUDING ANY IMPLIED
WARRANTY, MUST BE BROUGHT WITHIN A PERIOD OF 24 MONTHS FROM THE DATE OF
ORIGINAL PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY
CONSEQUENTIAL OR INCIDENTAL DAMAGES WHATSOEVER. No person or representative is
authorized to assume for the Company any liability other than expressed herein in connection with
the sale of this product. Some states/provinces do not allow limitations on how long an implied
warranty lasts or the exclusion or limitation of incidental or consequential damage so the above
limitations or exclusions may not apply to you. This Warranty gives you specific legal rights and you
may also have other rights which vary from state/province to state/province.
U.S.A.:
Audiovox Electronics Corporation, 150 Marcus Blvd., Hauppauge, New York 11788
CANADA:
Audiovox Return Center, c/o Genco, 6685 Kennedy Road, Unit 3, Door 16,
Mississauga, Ontario L5T 3A5
