10
Chapter 2
Graphics contained within this publication are for representation only.
Using the Remote Control
PRESETS
In TV mode, picture options are reset to original factory settings.
RECORD
In VCR mode, press to program your VCR to record a program.
REVERSE
In DVD mode, press REVERSE to go backwards on a disc.
SEARCH
In VCR mode, accesses Index Search feature.
SKIP
Press once before changing channels and the TV will wait 30 seconds before
returning to the original channel. Press repeatedly to add more time. In DVD mode,
displays the Info Display with the Angle icon highlighted.
SPEED
In VCR mode, selects a recording speed.
STOP
In DVD mode, stops playing the disc and displays the DVD’s menu system.
TV
Turns on the TV and puts the remote in TV mode. Also displays current status.
VCR
Puts the remote in VCR mode and, if auto tuning is enabled, will turn on the TV
and tune to the correct video input channel.
VOL – or VOL +
Decreases or increases the TV’s volume.
ZOOM
In DVD mode, zooms in on the picture.
Using the INPUT Button
Use the INPUT button to scroll through the available video input channels and view
components you have connected to the TV/DVD.
1. Make sure the component you want to view is turned ON.
2. Press INPUT to tune to an available video input source and view the component.
3. To return to the previous channel, continue pressing INPUT.
Programming the Remote to Operate Other
Components
The universal remote can be programmed to operate most
brands of remote controllable components. The remote is
already programmed to operate most RCA, GE, and Proscan
components.
Notes: The TV and DVD buttons can’t be programmed on this remote.
The remote may not be compatible with all brands and models of
components. It also may not operate all functions of the remote that
came with your component.
Find Out If You Need to Program the Remote
To determine whether the universal remote needs to be
programmed for your component, turn the component ON.
For example, to program the remote for a VCR, turn on the
VCR. Point the remote at the VCR, and press the VCR button.
Then press ON•OFF or CH + (channel up) or CH – (channel
down) to see if the VCR responds to the remote commands. If
the component does not respond, the remote needs to be
programmed.
DVD
ON OFF
VCR
TV
VOL
MUTE
GO BACK
CH
CLEAR
MENU
PRESETS
CC
GUIDE
INFO
SKIP
1
2
3
4
5
6
7
8
9
0
INPUT
ANTENNA
REVERSE
PLAY
FORWARD
RECORD
STOP
PAUSE
AGAIN
ZOOM
OPEN CLOSE
SPEED
SEARCH
OK
OK
DISC MENU
VCR button
ON•OFF
button
REVERSE
and PLAY
buttons
STOP
button
You’ll use these buttons when
programming the remote.
CLEAR
button
