RCA RPX4500U User Manual Download

Page: 59 / 59

RPX4500/RPX4600 P25 PORTABLE RADIO – USER MANUAL

FREQUENCY

BODY WORN

HANDHELD IN FRONT OF FACE

136 MHz – 174 MHz

1/2 inch (10 mm )

1 inch (25 mm )

400 MHz – 480 MHz

1/2 inch (10 mm )

1 inch (25 mm )

440 MHz – 520 MHz

1/2 inch (10 mm )

1 inch (25 mm )

Approved Accessories

To obtain a list of other RCA approved accessories contact RCA Communications Systems.

Contact Information

For additional information on exposure or any other item, please contact RCA Communications
Systems.

For Sales, Warranty and Customer Support please contact:

Discount Two-Way Radio Corporation – North American RCA Distributor

1430 240th Street

Harbor City, CA 90710

Phone: 310-224-5100 / Fax: 310-224-5101

www.DiscountTwo-WayRadio.com

• Always keep the radio at least 2 inches (5 cm) from your face when transmitting and at least

½ inch (10 mm) from the body. This radio has been tested for RF exposure compliance at the
distances listed in Table A1.

Table A1. RF Exposure Compliance Distances

www.rcacommunicationssystems.com

Communications Systems

Summary of Contents for RPX4500U




























































Search results

Summary of Contents for RPX4500U

Reviews:

Related manuals for RPX4500U

Brands by name

Popular brands

RCA RPX4500U, User Manual

Search results

Summary of Contents for RPX4500U

Reviews:

Related manuals for RPX4500U

Brands by name

Popular brands