background image

Copyright © 2015 RCA Communications Systems

RPX4500/RPX4600   P25 PORTABLE RADIO – USER MANUAL

2

PREFACE

This user manual covers the RPX4500/RPX4600 Series – RCA P25 Portable Radios.

Any performance figures quoted are subject to normal manufacturing and service tolerances. 
The right is reserved to alter the equipment described in this manual in the light of future 
technical development.

Changes or modifications not expressly approved by the party responsible for compliance could 
void the user’s authority to operate the equipment.

NOTE.

The manufacturer is not responsible for any radio or television interference caused by 
unauthorized modifications to this equipment. Such modifications could void the user’s authority 
to operate the equipment.

COPYRIGHT

All information contained in this document is the property of RCA Communications Systems 
(RCA). All rights are reserved. This document may not, in whole or in part, be copied, 
photocopied, reproduced, translated, stored, or reduced to any electronic medium or machine-
readable form, without prior written permission from RCA.

DISCLAIMER

There are no warranties extended or granted by this document. RCA accepts no responsibility for 
damage arising from use of the information contained in the document or of the equipment and 
software it describes. It is the responsibility of the user to ensure that use of such information, 
equipment and software complies with the laws, rules and regulations of the applicable 
jurisdictions.

EQUIPMENT AND MANUAL UPDATES

In the interests of improving the performance, reliability or servicing of the equipment, RCA 
reserves the right to update the equipment or this document or both without prior notice.

ERRORS AND OMISSIONS

Every effort has been made to ensure the accuracy and completeness of this manual; however, 
some errors and/or omissions may still exist. It is requested that any errors or omissions should be 
reported to RCA’s authorized North American dealer: 

RCA Communications Systems 

Discount Two-Way Radio

1421 Gould Blvd., Suite #A 

1430 240th St.

La Vergne, TN 37086 

Harbor City, CA 90710

Toll Free: (877) 822-2915/Fax (317) 536-3718 

Toll Free: (800) 895-5122/Fax (877) 291-9565

www.RCACommunicationsSystems.com/ 

Email: [email protected]

 www.DiscountTwo-WayRadio.com 

Summary of Contents for RPX4500U




























































Reviews: