EN
12
Recording to the mp3 Player/USB
Recording to mp3 player or USB device are
basically the same. You can record CD, Tuner or
AUX files to the mp3 player or USB device.
Recording CD to mp3 Player
Normal/High Speed Recording
1. Connect the mp3 player to the USB port, “USB
Connected” will show on the display of the
player.
2. In CD stop mode or CD navigation mode, press
RECORD-MP3 PLAYER
on the main unit or
press
REC P.
PLAYER
on the remote
control.
3. Press
,
or rotate
VOLUME CONTROL
to
select Normal or High Speed.
4. Press ,
RECORD-MP3 PLAYER
on the main
unit or press
REC P.
PLAYER
on the remote
control to confirm selection.
5. Press
,
,
or
to select track and
then press
.
The unit will start playback and recording will
begin.
REC
is displayed.
6. Press
, press
RECORD-MP3 PLAYER
on the
main unit or press
REC P.
PLAYER
on the
remote control to stop recording.
Example (Record all 5 CDs):
1. Make sure
ALL DISCS
mode is selected by
pressing
REPEAT
repeatedly.
2. Follow the above step 1-6.
Example (Record only selected
tracks from a CD):
1. Create a CD program by following instructions
under “Setting Up a CD Program” on page 15.
2. In CD stop mode or CD pause mode, press
RECORD-MP3 PLAYER
on the main unit or
press
REC P.
PLAYER
on the remote
control.
3. Press
,
or rotate
VOLUME CONTROL
to
select Normal or High Speed.
4. Press ,
RECORD-MP3 PLAYER
on the main
unit or press
REC P.
PLAYER
on the remote
control to confirm selection.
5. Press
PROG
to enter program playback mode.
Playback and recording will begin.
PROGRAM
and
REC
is displayed.
6. Press
, press
RECORD-MP3 PLAYER
on the
main unit or press
REC P.
PLAYER
on the
remote control to stop recording.
Tips:
To view remaining time (Rem), press
BAND/INFO
in recording mode.
Note:
The encoding bitrate for tuner, CD and AUX
signal are as below:
CD / Aux : 128 kbps
Tuner : 96 kbps
Tips:
Recording stops automatically when
CD stops (For example: end of disc is reached).
Tips:
If CD playback is already started,
recording will begin instantly when
RECORD-MP3 PLAYER
on the main unit or
REC P.
PLAYER
on the remote control is
pressed.
If CD playback is stopped, select Normal/High
speed using
or
then press
to
confirm selection. Press
,
,
or
to
select track and then
to start recording.
Recording will not start until CD starts
playback.
Note:
High speed recording mode can save
time when recording from CDs. It is normal
that the pitch is increased during high speed
recording.
RS2100 EN (04_07_06) 7/7/06 11:29 AM Page 19
