background image

SERVICE , MANUAL 

1.7.3 Function Table

Inputs

E

Sn

Channel On 

L

L

Y

0n

-Z

n

L

H

Y

1n

-Z

n

H

X

none

Notes

H=HIGH state (the more positive voltage) 

L=LOW state (the less positive voltage) 

  X=STATE is immaterial

1.7.4 Refer to Table 8 about Functions and Data of HEF4053’s Pins. 

1.8 Power supply circuit STR-G5653 

The Series STR-G5653/F6654 is specifically designed to satisfy the requirements for increased

integration and reliability in off-line quasi-resonant flyback converters. The series incorporates a 

high-precise error amplifying control and drive circuit with discrete avalanche-rated power MOSFET,

featuring fewer external components, small-size and standard power supply.

Covering the power range from below 25 watts up to 300 watts for 100/115/230 VAC inputs, and up to

150 watts for 85 to 265 VAC universal input, these devices can be used in a range of applications, from

battery chargers and set top boxes, to televisions, monitors, and industrial power supply units. 

Cycle-by-cycle current limiting, under-voltage lockout with hysteresis, over-voltage protection, and

thermal shutdown protects the power supply during the normal overload and fault conditions.

Low-current startup and a low-power standby mode selected from the secondary circuit completes a

comprehensive suite of features. The series is provided in a five-pin overmolded SIP style package,

affording dielectric isolation without compromising thermal characteristics. 

(1) Features 

Flyback Operation with Quasi-Resonant Soft Switching 

for Low Power Dissipation and EMI 

Rugged Avalanche-Rated MOSFET 

Soft drive circuit MOSFET 

Adjustable MOSFET switching speed 

Choice of MOSFET Voltage and rDS(on) 

Full Over-Current Protection (no blanking) 

Under-Voltage Lockout with Hysteresis 

Over-Voltage Protection 

Direct Voltage Feedback 

Low Start-up Current (100

ȝ

Amax)

Low-Frequency, Low-Power Standby Operation 

28

Summary of Contents for MCR51R410












































Reviews: