background image

Chapter 4 

43

Other Information

How state law relates to warranty:

•  Some states do not allow the exclusion nor limitation of incidental or consequential damages, or limitations on how 

long an implied warranty lasts, so the above limitations or exclusions may not apply to you.

•  This warranty gives you specifi c legal rights, and you also may have other rights that vary from state to state.

If you purchased your product outside the United States:

•  This warranty does not apply.  See your dealer for warranty information.

Service calls which do not involve defective materials or workmanship are not covered by this warranty.  Costs of 
such service calls are the sole responsibility of the purchaser.

Care and Cleaning

CAUTION: Turn OFF your TV before cleaning.

You can clean the TV as required, using a soft lint-free cloth. Be sure to occasionally dust the ventilation slots in the 
cabinet to help assure adequate ventilation.

IMPORTANT: Never use strong cleaning agents, such as ammonia-based cleaners, or abrasive powder. Th

  ese types of 

cleaners will damage the TV.
Th

  e TV’s screen may be cleaned with a soft, lint-free cloth as well.  Take care not to scratch or mar the screen. If 

necessary, you may use a cloth dampened with warm water.

 

While cleaning do not spray liquid directly on the screen, 

or allow liquid to run down the screen and inside the TV. Also, never place drinks or vases with water on top of the TV. 
This could increase the risk of fi re or shock hazard or damage to the TV.

1670729A.indb   43

1670729A.indb   43

6/2/06   4:21:20 PM

6/2/06   4:21:20 PM

Summary of Contents for L32WD12 - 32in Widescreen LCD

















































Reviews: