background image

42 

Chapter 4

Other Information

Limited Warranty

What your warranty covers:

•  Defects in materials or workmanship.

For how long after your purchase:

•  1 year from date of purchase for parts and labor.

What we will do within one year:

•  At our option, either (a) pay any Authorized RCA Television Service Center the labor charges, plus replacements 

parts, to repair your television, or (b) replace your television.

•  At our option, the replacement parts or replacement television provided under the warranty may be new or 

refurbished.

What your warranty 

does not

 

cover:

•  Acts of nature, such as but not limited to lightning damage.

•  Adjustment of customer controls.

•  Damage from misuse or neglect.

•  A unit that has been modifi ed or incorporated into other products or is used for institutional or other commercial 

purposes. 

• Batteries.

•  Units purchased or serviced outside the U.S.A.

•  Shipping damage if the unit was not packed and shipped in the manner prescribed by TTE Technology, Inc..

•  Customer Instruction. (Your Owner’s Manual describes how to install, adjust, and operate your unit. Any additional 

information should be obtained from your dealer.)

How you get service:

•  Take your RCA television to any Authorized RCA Television Service Center and pick up when repairs are complete.

•  To identify your nearest Authorized RCA Television Service Center, ask your dealer, visit www.rca.com/television, 

look in the Yellow Pages, or call 1-800-951-9582.

•  Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the product is within the 

warranty period must be presented to obtain warranty service. For rental fi rms, proof of fi rst rental is also required.

Product Registration:

•  Please complete and mail the Product Registration Card packed with your TV or register on-line at 

www.rca.com/television.  It will make it easier to contact you should it ever be necessary.  The return of the card is 
not required for warranty coverage.

Limitation of Warranty:

•  THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT.  

ALL OTHER WARRANTIES, EXPRESS OR IMPLIED (INCLUDING ALL IMPLIED WARRANTIES OF 
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE) ARE HEREBY DISCLAIMED.  
NO VERBAL OR WRITTEN INFORMATION GIVEN BY TTE TECHNOLOGY, INC., ITS AGENTS 
OR EMPLOYEES SHALL CREATE A GUARANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS 
WARRANTY.  

•  REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY 

OF THE CONSUMER.  TTE TECHNOLOGY, INC. SHALL NOT BE LIABLE FOR INCIDENTAL OR 
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF 
ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT.  THIS DISCLAIMER 
OF WARRANTIES AND LIMITED WARRANTY ARE GOVERNED BY THE LAWS OF THE STATE OF 
INDIANA.  EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY 
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS 
LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE. 

1670729A.indb   42

1670729A.indb   42

6/2/06   4:21:20 PM

6/2/06   4:21:20 PM

Summary of Contents for L32WD12 - 32in Widescreen LCD

















































Reviews: