24
Chapter 3: How to clone TV
After you set up one television, you can copy the settings onto a USB stick and apply them to your other tele-
visions.
You will need a properly configured USB Memory stick to learn the settings from your television.
Contact RCA Commercial Distribution(1-800-RCA-2161) to obtain an RCA USB Memory stick, or setup your
own memory stick by following the “Configuring your memory stick” section below.
1. Plug a USB key into the USB port of your PC.
2. Open Windows Explorer
3. Right Click on the USB drive in Windows Explorer and select “New” followed by “Folder.”
4. Name the folder, “CMSTDF.”
Exit
Next
Move
Cloning Main Menu
Restore Settings to TV
Save Settings to USB
Upload Firmware to TV
Information
G
G
Back
Next
Adjust
Save Settings to USB
Source Model : DM-931KA
File Name Edit:
J 3 2
Back
No
Yes
Save Settings to USB
Save Settings from TV
to J32LED--.tdf file in USB?
Back
Save Settings to USB
Settings saved from TV
to J32LED--.tdf file in USB
Chapter 3
Configuring your memory stick:
1. Press the
MENU
button to enter the on-screen
menu.
2. Press the
Down
or
Up
button to select the Setup
sub-menu and then press the
OK
button.
3. Press the
Down
or
Up
button to select the
Firmware Upgrade
sub-menu and then press the
OK
button.
4. Press the
Right
button to choose
Save Settings to
USB
and then press the
Right
button.
5. Edit filename by pressing
Up/Down/Left/Right
keys.
6. Press the
Up
key to write settings to the USB stick
Settings will be copied to USB drive.
Copying settings out of television:
To set up a USB key to you need to create a directory (folder) on the USB stick called CMSTDF.