RCA Home Theater Audio System, Owner'S Manual

Page: 28 / 36

28
CUSTOMIZING FUNCTION SETTINGS
5. Press or to select
Edges
. Press
ENTER
.
6. Press or to select
Sharpen
,
Soften
, or
Off
. Press
ENTER
.
•
Sharpen
: Fine detail is easier to see.
•
Soften
: Soft-focus effect.
•
Off
: Picture is returned to normal.
7. Press
RETURN
D
to exit and return to the normal screen.
AUDIO SETTINGS
D
IGITAL
O
UT
1. Repeatedly press FUNCTION until
DVD
appears.
2. Press STOP .
3. Press SETUP .
4. Press or to select
Audio
. Press ENTER .
5. Press or to select Digital Out, and then repeatedly press
ENTER to select
RAW
or
PCM
.
•
RAW
: Does not have Dolby Digital Decode.
•
PCM
: Has Dolby Digital Decode.
6. Press RETURN
D
to exit.
L/R S
PEAKER
This selection allows you to select the size of your left and right
speakers’ cones for optimal performance.
1. Repeatedly press FUNCTION until
DVD
appears.
2. Press STOP .
3. Press SETUP .
4. Press or to select
Audio
. Press ENTER .
5. Press or to select
L/R Speaker
. Press ENTER .
6. Press or to select
Small
or
Large
. Press ENTER .
•
Small
: Speaker cone size diameter is less than five inches.
•
Large
: Speaker cone size diameter is greater than five inches.
7. Press RETURN
D
to exit and return to the normal screen.
Notes:
• You can adjust the channel balance on your player. See
“Adjusting Sound Quality” on page 29.
• Included speakers should be set to
Small
for optimal sound
quality.
S
UBWOOFER
1. Repeatedly press FUNCTION until
DVD
appears.
2. Press STOP .
3. Press
SETUP
.
4. Press or to select
Audio
. Press
ENTER
.
5. Press or to select
Subwoofer
. Press
ENTER
.
6. Press or to select the desired setting. Press
ENTER
.
•
On
: Turns on the Subwoofer.
•
Off
: Turns off the Subwoofer.
7. Press
RETURN
D
to exit and return to the normal screen.
Note: You can adjust the channel balance on your player. See
“Adjusting The Sound” on Page 29.
S
URROUND
D
ELAY
1. Repeatedly press
FUNCTION
until
DVD
appears.
2. Press
STOP
.
3. Press
SETUP
.
4. Press or to select
Audio
. Press
ENTER
.
5. Press or to select
Surround Delay
, then repeatedly press
ENTER
until the desired Surround Delay type (
0/15ms
,
5/
20ms
,
10/25ms
, or
15/30ms
) appears.
Notes:
• The first number represents the delay in Dolby Digital mode and
the second number represents the delay in Dolby Pro Logic
mode.
• The delay adjustment depends on the location of the surround
speakers and the front speakers. If the surround speakers are
closer than the front speakers, the delay adjustment can
compensate for the difference in distance.
Use the following charts to determine the delay setting. Follow
the vertical line for distance to your front speakers, and the
horizontal line to your rear(surround) speakers. At the
intersection, follow the diagonal line to the delay time..
Dolby Digital Mode
31-5025.fm Page 28 Wednesday, January 15, 2003 5:05 PM