17
VCR OPERATION
You can also send the player’s information to your TV via the Video
Out RCA line. Be sure to set your TV to LINE or a VIDEO channel to
view input from the player. Use this option for A/V cable
connections.
1. Press
POWER
1
to turn the power off.
2. Press
TV/VCR
.
• If the VCR POWER, TIMER and VCR LEDs flash, the VCR
Output Channel is 3.
• If the VCR POWER, TIMER, VCR and REC LEDs flash, the
VCR Output Channel is 4.
3. To change the output channel, hold down
TV/VCR
until the
VCR POWER, TIMER, VCR and REC LEDs (or VCR POWER,
TIMER and VCR LEDs) flash.
4. Release
TV/VCR
. The Output Channel is set.
Notes:
• During Set Up, the VCR Output Channel is automatically set.
• If Channel 3 is an active broadcast channel in your area,
Channel 4 is set. If Channel 4 is an active broadcast channel in
your area, Channel 3 is set.
• To cancel Set Up, press
VCR ON/OFF
during Set Up, before the
Output Channel is selected.
M
ODE
S
ELECTION
You can use the SET UP selection screen to select the mode for basic
features.
1. Turn on the TV and select the video channel. Press
POWER
1
,
press
VCR ON/OFF
(the VCR POWER LED lights), and then
press
TV/VCR
to select
VCR
(the VCR LED lights).
2. Press
MENU
.
3. Press
or
to select
SET UP
and press
ENTER
.
4. Press
or
to select
AUTO REPEAT
.
5. Press
or
to select
ON
or
OFF
. (See“Recorded Section Auto
Repeat” on Page 23.)
6. Press
to confirm the selection and select
BLUE SCREEN
.
7. Press
or
to select
ON
or
OFF
. (See “Eliminating Blue
Screen Noise” on Page 20.)
8. Press
to confirm the selection and select
SAP
(Separate
Audio Program).
Note:
SAP is used for bilingual broadcasting. Check your local
broadcast station, or cable company, for SAP broadcast
availability.
9. Press
or
to select
ON
or
OFF
. (See “Recording Multi-
channel TV Sound (MTS) Broadcasts” on Page 21.)
10. Press
to confirm the selection and select
AUDIO OUTPUT
.
11. Press
or
to select
MONO
,
LR
,
L
, or
R
. (See “Audio Output
Mode” on Page 20.)
12. Press
ENTER
to confirm the selection and exit.
Note:
If you press
MENU
to exit the mode selection screen in
Step 12, the data is not stored.
C
HANNEL
P
RESET
Your VCR can receive a maximum of 181 channels by presetting the
channels into memory. (VHF: 2 to 13, UHF: 14 to 69, CATV: 1 to
125)
Note:
Make sure a coaxial cable (antenna or CATV) is connected to
the VHF/UHF/CATV IN jack on the rear of the player.
1. Press
MENU
.
2. Press
or
to select
CHANNEL PRESET
. Press
ENTER
.
3. Press
or
to select
AIR
or
CATV
.
4. Press
to confirm the selection and select
CH SET
.
5. Press
or
to select
AUTO
. Press
ENTER
. Auto tuning
begins automatically. The screen returns to normal when setting
is complete.
Notes:
• If the power is interrupted for more than 5 seconds, you must
start over setting AIR/CATV.
• Automatic tuning is interrupted if
VCR ON/OFF
or
MENU
is
pressed before the setting is complete.
A
DDING
/E
RASING
C
HANNEL
M
EMORY
Use this function to manually add or erase channels in the memory.
1. Press
MENU
.
2. Press
or
to select
CHANNEL PRESET
, and press
ENTER
.
3. Press
or
to select
CH SET
.
4. Press
or
to select
MANUAL
, and then press
ENTER
.
5. Press
or
to select
ADD
or
ERASE
.
Notes:
• Press the number buttons to select a channel to add, or press
CH+
,
CH–
or the number buttons to select a channel to erase.
• Press
or
to view the status of added and erased
channels.
6. Press
MENU
to exit and return to the normal screen.
Notes:
• If the power is interrupted for more than 5 seconds, the channel
memory may be erased. If this happens, reset the channels and
the AIR/CATV selection.
• If a button is not pressed for 3 minutes, the screen returns to
normal.
31-5025.fm Page 17 Wednesday, January 15, 2003 5:05 PM
