RCA DRC99392 Product Manual Download

Page: 6 / 20

This owner’s manual explains the basic instructions for operating

this unit. Some DVDs are produced in a manner that allows specific

or limited operation during playback. Therefore, this unit may not

respond to all operating commands. THIS IS NOT A DEFECT. Please

refer to the instructions accompanying the specific DVD in question

for more information about the options available on that DVD.

“ ” may appear on the screen during operation. A “ ” means the

desired operation is not permitted by the unit or disc.

Playing a Disc

1. Slide the

CHARGE

STANDBY

switch on the left side of the

unit to the ON position.

See Customizing the function settings before proceeding to step 2.
2. Press the

OPEN

knob to open the disc door.

3. Hold the disc by its sides and carefully place it onto the spindle with

the label side facing up, pushing gently until you hear a “click”.

4. Close the disc door. It takes a short while for your unit to load the

disc. After loading, the unit will automatically bring you to the main
menu of the DVD or start playing the DVD.

5. If the unit does not automatically start playing the DVD, press the

PLAY

button on the remote control or button on the unit.

Pausing Playback (Still Mode)

Press the

PAUSE

button. To resume normal playback, press the

PLAY

button on the remote control or button on the unit.

For a DVD, each time you press the

PAUSE

button on the remote

control, the picture advances one frame.

Stopping Playback

Press the

STOP

button at the location where you want to interrupt

playback. To resume playback at the position where the disc was
stopped, press the

PLAY

button on the remote control or button

on the unit.
If you press the

STOP

button twice, the unit’s memory will be cleared

and pressing the

PLAY

button on the remote control or button on

the unit will reset the DVD to the beginning.

Fast Forward / Fast Reverse

1. Press the

SEARCH

button when a disc is playing.

Each time you press the

SEARCH

button, the

playback speed changes in the following sequence:

Playing a Disc (Basic Playback)

2. Press the

PLAY

button on the remote control or press the

button twice on the unit when you reach the desired point to
resume normal playback.

Notes:

• The DVD player mutes sound and subtitles during reverse and

forward scan of DVDs.

• The fast playback speed may differ depending on the disc.

Skip (Forward / Reverse)

• Press the

NEXT

button to advance titles, chapters/tracks.

• Press the

PREV

button to go back to current or previous titles,

chapters/tracks.

• For an Audio CD, use the number buttons on the remote control to

go directly to the desired track number.

Audio Selection

On some DVDs, the sound is recorded in two or more formats. Follow
the directions below to select the preferred language and sound
system.
1. While a disc is playing, press the

AUDIO

button to show the current

audio format number.

Audio 1/3:Dolby D 2ch English

2. Press the

AUDIO

button repeatedly to select the desired audio

format.

Notes:

• If only one audio format is recorded on the DVD, the number does

not change.

• Some DVDs allow you to change audio selections using the disc

menu only. If this is the case, press the

MENU

button and choose

the appropriate language on the disc menu.

• You can select different audio channels (Stereo, Mono Left, Mono

Right or Mix-Mono) on an Audio CD by pressing the

AUDIO

button

repeatedly.

Subtitle Selection

1. While a DVD is playing, press the

SUBTITLE

button to display the

current language setting, as shown in the example.

Subtitle 02/03:Spanish

2. Press the

SUBTITLE

button repeatedly to select the desired subtitle

language. you can turn subtitles off by pressing the

SUBTITLE

button repeatedly until the “

Subtitle Off

” is displayed.

Notes:

• Some DVDs are set to display subtitles automatically, and you

cannot turn them off even if you set the subtitle function to off.

• During some scenes, the subtitles may not appear immediately

after you select your desired scene.

• The number of subtitle languages recorded differs depending on

the disc. If only one language is recorded, the language does not
change.

• This function can only be used for discs on which subtitles have

been recorded in multiple languages.

• Some DVDs allow you to change subtitles using the disc menu

only. If this is the case, press the

MENU

button and choose the

appropriate subtitle on the disc menu.

Angle Selection

Some DVDs contain scenes that have been shot from a number of
different angles. For these discs, the same scene can be viewed from
each of these different angles.
1. While you are playing a DVD with different angles recorded, press

the

ANGLE

button to view the number of current angles available.

2. Press the

ANGLE

button repeatedly to change the scene to the next

recorded angle.
• After approx. two seconds, playback will continue from the new

angle selected.

Connections

Caution:

Avoid listening to sound
at levels which may be
harmful to your ears.

Headphones/Earphones