22
CABLE
RESET
ETHERNET
USB
9
V
D
C
8
0
0
m
A
Ethernet Connection to One Computer
Make the connections to the modem in the following sequence (Fig. 31):
1.
Connect one end of the coaxial cable to the cable connection in the wall, and the other end to the
connector on the modem labeled CABLE.
2.
Insert the plug from the AC power supply into the power AC jack labeled 9V DC 800mA on the cable
modem and the two-prong plug into an AC outlet.
Note:
Use only the power supply that accompanied this unit. Using other adapters may damage
the unit.
3.
Connect one end of the Ethernet cable (straight-wired, see below) to the Ethernet port on the back of
your computer, and the other end to the ETHERNET port on the cable modem’s back panel.
Make sure that the Ethernet cable is straight-wired (not “null” or crossover-wired). However, you will
need a crossover-type cable if you are connecting the modem to a hub, or a hub within a port switch that
provides the same function.
Fig. 31: Ethernet Connection
AC Power Supply
CABLE Jack
Connecting the Cable Modem
1
2
3
Coaxial Cable
Ethernet Cable
Note:
Graphics used
within this
publication
are for
representation
only.