20
Chapter 1
Connections & Setup
Using the Power Supply
The power supply attaches to the camcorder and lets you power it directly from standard
household power. The power supply operates on 110-240 volts, 50/60 Hz, so it can be
used virtually anywhere in the world to power the camcorder or recharge the battery.
1.
Plug the small end of the power supply into the DC IN jack on the camcorder.
2.
Plug the other end of the power supply into a working AC outlet (110-240V, 50/
60Hz).
Caution:
Never use this power supply for any purpose other than charging the
FB1260 or supplying power to the camcorder.
Removing the power supply
1.
Make sure the Power switch is set to OFF.
2.
Unplug the power supply from the AC outlet.
3.
Unplug the small end of the power supply from the DC IN jack on the camcorder.
Important:
Before detaching the power source, make sure the camcorder’s power is
turned off. Failure to do so can result in a camcorder malfunction.
Using an Optional Plug Adapter in Foreign Countries
An optional plug adapter might be required in some countries.
1.
Plug the power supply’s plug into the AC plug adapter.
2.
Plug the AC plug adapter into the AC outlet.
DC IN jack
AC power supply
MENU/BRI
GHT
/TRACKING
SNAPSHOT
VOL
STEA
DY P
IX/TB
C
+
+
DIGI
TAL
(DSC
IN/O
UT)
PL
AY
O
FF
A
M
ST
OP
R
RE
TA
KE
F
LIGHT
OFF AU
TO ON
COU
NTE
R R
/M
FAD
E/W
IPE
P. A
E
DIG
IFEC
T
1
2
