RCA CC638 User Manual Download

Page: 6 / 116

First-Time Operation

CAMERA

VCR

POWER
OFF

AUDIO

VIDEO

POWER

CHG END REFRESH

POWER
Indicator

DC OUT Jack

DC Cable

Adapter/Charger

To AC 100-
240V, 50/60 Hz

2. Attach the adapter/charger.

Since the battery must be charged
before it can be used the first time,
attach the adapter/charger to the
camcorder.

A. Connect one end of the DC cable to

the DC OUT jack on the
adapter/charger.

B. Connect the other end of the DC

cable to the DC in jack on the
camcorder as shown above.

C. Plug the adapter/charger’s plug into

an operating outlet. The adapter/
charger’s POWER indicator will
light

3. Insert a tape.

• Slide EJECT.

• Turn the tape wheel on the cassette

to remove any slack from the tape.

• Insert the cassette with the tape

wheel facing up and the tape window
facing out.

• Press on the area labeled PUSH until

the cassette door locks into place.

Summary of Contents for CC638





















































































































Search results

Summary of Contents for CC638

Reviews:

Related manuals for CC638

Brands by name

Popular brands

RCA CC638, User Manual

Search results

Summary of Contents for CC638

Reviews:

Related manuals for CC638

Brands by name

Popular brands