2
3. Press another line button and dial the telephone number of the party you want to
conference with.
4. Press the Conference button.
5. Speak to both parties.
NOTE: If you have more than one line on hold, and you want to have a conference call, you
must first select the line on which you want to conference.
To disconnect one party:
Press the line button for the person you want to continue speaking with, and the other
party is automatically disconnected.
To disconnect both parties:
Hang up the handset, or press the Speaker or Headset button.
NOTE: If you press the Hold button to put them on hold first, you may then disconnect from
each party individually.
Intercom Calls
One-Touch Intercom
NOTE: If the Intercom indicator is turned on (solid red), the intercom is in use. You must wait
until the indicator turns off before making an intercom call.
1. Press the Intercom/Memory Log button (1-16) for the station you want to
intercom with. The Speaker turns on.
Alternately, you may press the Intercom button, then press the Intercom/Memory Log
button (1-16) for the stations you want to intercom with. The speakerphone
automatically turns on.
NOTE: If you want to switch to the handset, pick it up and continue speaking. To switch to
the headset press the Headset button.
NOTE: The handset, headset, or speakerphone cannot be active when an intercom call is
initiated (the handset should be on the cradle and the speakerphone and headset turned
OFF.)
NOTE: To abort intercom call, press Speaker button.
2. To end the intercom call, hang up.
NOTE: If the receiving station does not answer within 45 seconds, the intercom call is
cancelled. You will hear an error tone and NO ANSWER shows in the display. NOTE: If the
intercom is in use. You will hear an error tone and ERROR INHIBITED shows in the display.
Intercom Calls