7
Introduction
CAUTION:
When using telephone equipment,there are basic safety
instructions that should always be followed. Refer to the IMPORTANT
SAFETY INSTRUCTIONS provided with this product and save them for
future reference.
Short Glossary of Terminology Used in this Manual
Hook switch.
The part of the phone that pops up to activate the phone line
when the handset is lifted from the base.
Line indicator.
The light located next to each of the line buttons; it shows you
the status of each line.
Off-hook.
A term used to describe the phone in its active mode when the
handset is off of the base cradle or a line button, along with the
Speaker
but-
ton, is pressed.
On-hook.
A term used to describe the phone in an inactive mode.
BeforeYouBegin
Parts Checklist
Make sure your package includes the following items:
Base
Handset
Desktop
pedestal
Handset cord
4-wire telephone
line cord
Modular Jack Requirements
To properly connect your phone to your telephone lines, you should identify
the type of wall jack(s) you have. You will need an
RJ11C (for a single line) or a RJ14C (for two lines) type
modular phone jack, which might look like the one
pictured here. If you don
’t have either modular jack,
call your local phone company to find out how to get
one installed.
Modular
telephone
line jack
Wall plate