16
pressing the
Dial
button. For example, sometimes a 7-digit local number can-
not be dialed because it requires a 10-digit or 11-digit format . Press the
Dial
button repeatedly to scroll through the 7, 10, and 11-digit numbers.
7-digits:
7-digit telephone number (i.e. 555-5555)
10-digits:
3-digit area code + 7-digit telephone number
(i.e. 425-555-5555)
11-digits:
long distance code 1 + 3-digit area code + 7-
digit telephone number (i.e. 1-425-555-5555)
4. To dial the displayed number and the phone is on-hook, pick up the hand-
set or press the
Speaker
button before the timer reaches 0. If the phone is
off-hook, wait until the time reaches 0.
NOW DIALING
shows in the display
and the number is dialed.
NOTE:
Make sure either the 1 or 2 line button is pressed.
If You Did Not Program Your Local Area Code In the Set Up Menu
1. Use the
Review
or
buttons to display the number you want to dial.
You will only see 10-digit numbers (i.e. 234- 555-1234).
2. See steps 2 through 4 in the previous section to complete the dialback
process.
CallerID Display Messages
The following special messages indicate the status of a message or the unit:
BLOCKED CALL
The caller of the incoming call is registered as
“Private Number” and their Caller ID information is
withheld.
CALL WAITING
Indicates a call is waiting on the line.
Battery power level is low.
NO CALLS
The caller memory is empty.
START/END
You are at the beginning or the end of the Caller ID
memory log.
UNKNOWN CALLER
The incoming ca ll does not have Caller ID service or
their service area is not linked to yours. If
UNKNOWN CALLER
appears along with a calling
number, the name information for that number was
not available.
