19
Using the Speakerphone
To use the speakerphone feature, press a line button and then press the
Speaker
button. For more information refer to Speakerphone Basics.
Placing a Call While Talking on Another Line
To place a call without hanging up on the first call:
1. Press the
Hold
button to put the first call on hold.
2. Press the available line button to get a dial tone. Press the
Speaker
button if
the speakerphone indicator is off and you are using the speakerphone.
3. Dial the number you want to call.
Receiving A Call While Talking on Another Line
When you receive a call while you are talking on another line, you will hear the
phone ring.
1. Press the
Hold
button to put the first call on hold.
2. Press the
Line
button next to the flashing red indicator.
3. If the speakerphone indicator is off and you are using the speakerphone,
press the
Speaker
button.
NOTE:
You must always put the first call on hold before answering a second
call or you will hang up on the first call. If you want to disconnect from the
first call,
don’t press the Hold button (skip step 1) and press the flashing line
button.
Additional Telephone Features
Redial
You may redial the last number you called by pressing the
Redial/Pause
button after you hear a dial tone.
NOTE:
The redial feature holds the last number (up to 32 digits) that you
dialed in memory. If you pressed any other numbers after dialing the phone
number (for example, when accessing a voice-menu system) then those
numbers are also dialed.
If you get a busy signal, press
Redial/Pause
again without hanging up.
Hold
Hold allows you to suspend the active line(s) and replace the handset in the
cradle without hanging up, then resume the conversation on the same phone
or from a different phone connected to the same line.