NOTE: The phone will exit Set Up after 20 seconds i f no buttons are
pressed.
REMINDER: The time and date are programmed automatically when
the first Caller ID record is successfully received after set up.
Memory
You may store information in any of the following memory locations: 0 to 9, A,
B, and C . See “Storing a Pause in Memory” and “Temporary Tone Dialing” for
more information.
Storing a Name and Number in Memory
1. Press the store button. The screen displays
LOCATION?
.
2.
Press the desired memory location (0-9, A, B, C).
NOTE: You may select memory locations by pressing review
or
buttons to scroll through the memory locations or press the 0 - 9, A, B,
C.
3.
Press the store button again to confirm the memory location
.
NOTE: If necessary, to erase existing memories, or if you make a
mistake, use the delete button.
4
. Use the number keys to enter the telephone number (up to 32 digits) and
press the store button to save. (The unit will not dial a phone number in this
mode.) The cursor automatically moves to the text line for name entry.
5. Use the number keys to enter the name of the person associated with the
telephone number you just entered. More than one letter is stored in each
of the number keys. For example, to enter the name BILL SMITH, press the
2 key twice for the letter B. Press the 4 key 3 times for the letter I. Press the
5 key 3 times for the letter L.
NOTE: The flashing cursor automatically moves to the next position
or you may press the review
or
buttons to move the cursor to
the next position.
Press the 5 key 3 times for the second letter L. Press the arrow key (4) two
times to insert a space, and press the
7 key 4 times for the letter S. Press the 6 key once for the letter M. Press the
4 key 3 times for the letter I. Press the 8 key for the letter T. Press the 4 key
twice for the letter H.
6. Press the
store
button to save the name.
7. To enter another name and number in a different memory location, return
to step 1 and repeat the process.
