Optional Accessories (Not Included)
In most cases, RC5 transceivers can be mounted and connected without the need for additional
accessories.
It is recommended to use cable that fits within the diameter range of the provided glands.
Smaller cable sizes are NOT recommended and should be avoided. If a larger cable or conduit
must be accommodated, a larger gland can be installed by removing the existing gland, enlarging
the hole, and installing the replacement gland.
Caution: When enlarging gland holes, be sure to remove ALL resulting debris from the
RC5 EASS IP65 enclosure when done. Avoid contaminating the RC5 enclosure with metal
particles on drill bits and other tools.
The following are available at additional cost:
● Alternative antennas, including high-gain, directional, Yagi, panel, and more.*
● Antenna extension cables for mounting an antenna some distance from the RC5 enclosure.
● Pole mounting kits for RC5 EASS IP65 enclosures.
● Larger sizes of cable glands, for both power and data connections.
Caution: To ensure regulatory compliance, ONLY approved antennas may be used with RC5
EASS IP65 transceivers. A list of approved antennas is available from RC4 Wireless.
