66
Performing a Factory Reset
If someone else has used your LumenDimPixMicro,
or you just want to get back to a known
configuration, performing a factory reset is easy:
Power on the device. The green COP indicator will
be blinking.
Press and hold Func, briefly tap (press and release)
the SetA button, then release Func. COP and
Data indicators will blink together to confirm that
factory settings are restored.
NOTE: This does NOT affect transmitter linking.
You must intentionally unlink to disconnect from a
previously linked transmitter.
PRO TIP:
If you are not sure what settings are
currently selected, you can always get back to
a known starting point by returning to factory
default.
RF
F
B
A
RF Conn
SetA
Func
DMX Data
COP
C2 D2 C1 D1
+
IN-
