13
13
RC4 OneTouch
TM
Implementation in LumenDimPixMicro
In the implementation chart below, channel S is the DMX Start Channel, range
1 to 512. The level of channel S and the next three channels set RC4 Custom
Pixel Profile
TM
parameters.
Parameters are described in detail on pages 14 - 17.
Before pressing a Set button, the start (S) channel must be at the correct
level for the pixel type being used. If the level of any subsequent parameter
channel is at zero, the previous setting for that parameter is retained. This
makes it easy to change only the start channel and pixel type.
RC4 OneTouch
TM
channel levels only matter at the moment a Set button is
pressed.
Example:
DMX Start Channel 74 (first non-zero ch is 74)
WS2812 Pixel Type (start ch at level 77, which is 30%)
60-pixel Keyframe Length (first ch above Start, ch 75, set to level of 60)
Pixels controlled in Groups of 3 (ch76 set to level of 3)
Increment/Decrement Replication Method (ch 77 at 55, which is 22%)
DMX Chan:1 2 3 4 5 6 7 8 . . . . 65 66 67 68 68 70 71 72 73
74
75 76 77 78 79 80 81 82 . . . .
DMX Lev: 0 0 0 0 0 0 0 0 . . . . 0 0 0 . . . .
77 60
3
55
0 0 0 . . . .
Channels below Start at zero (0)
First channel up sets DMX Start
Level of DMX Start sets pixel type
Sets keyframe length
Sets Group Length
Sets Replication Method
DMX Start Channel for Pixel Control:
S (any chan from 1 to 512)
Keyframe Length in Pixels:
S + 1
Group Length in Pixels:
S + 2
Pattern Replication Method:
S + 3
Press a Set button to
capture and save levels
as CPP settings.
