12
12
RC4 OneTouch
TM
for Setting Parameters
with DMX Channel Levels
NOTE: To use RC4 OneTouch
TM
, the LumenDimPixMicro must be paired to a CRMX
transmitter, and live DMX channel data must be streaming.
RC4 OneTouch
TM
uses four DMX channel levels to assign values to
LumenDimPixMicro parameters. Channel levels are captured and saved with the
press of a single button for each driver port using the SetA and SetB buttons.
While you are using RC4 OneTouch
TM
, only DMX channels that are setting
parameters should be at levels above zero. All other channels should be off.
NOTE: Channels being used in your DMX system for house-lights and moving light
parameters (like pan and tilt) must also be at true zero.
When a RC4 OneTouch
TM
button is pressed, the driver sets the first non-zero
channel as the DMX Start Channel. In addition, the level of that channel selects
one of four popular pixel types. The three channels immediately following
the DMX Start Channel are used to set Keyframe Length, Group Length, and
Replication Method.
Settings are remembered even when power is cycled. After parameters
are set, return to using your DMX console as you normally do, controlling
LumenDimPixMicro pixels and everything else in your lighting system.
Using RC4 OneTouch
TM
is easy:
1. Set channel levels to reflect desired settings for a driver port.
2. Press the Set button for the port.
3. Repeat for other ports, and other devices in your system.
4. Proceed with using your DMX console as you normally do.
