3
RC4 LumenDimPixMicro
1. DMX Data Indicator
2. Function and COP
2
Indicator
3. Function Button
4. SetA and SetB Buttons
5. RF Connect Indicator for Transmitter Linking
6. RF Connect (Link) Button
7. Male Connector Pins for Power In and Pixel Clock/Data Outputs
8. DMX/RDM In/Out Data Port
9. Disconnectable Female IDC Connector
1
for Power In and Pixel Outputs
10. Pixel Data Connection Wires (Clock/Data1, Clock/Data2)
11. Power Connection Wires (DCin +/-)
1. Connector is Amp MTA-100-Series, 0.1” pin spacing. Shell color indicates wire gauge. Red shell is for
22 AWG wire, Amp connector P/N 3-641190-6. Numerous alternatives are available, each with different
P/Ns. Use the correct shell for the wire you are using. Amp also supplies crimping tools for these
connectors. One 22 AWG connector assembly is included with each LumenDimPixMicro. Additional
cable assemblies are available from RC4 Wireless.
2. COP means “Computer Operating Properly.” This indicator always shows a blink pattern,
proving that internal firmware is running. Different patterns indicate advanced settings.
3
