55
LumenDim6 System Components
To use your LumenDim6 wireless dimmer you will need:
•
A DMX lighting console.
•
A LumenRadio CRMX-compatible wireless transmitter like the
RC4 LumenDimIO or the LumenRadio TX1.
•
A battery or DC power supply for the dimmer and loads you will be
operating with it.
•
Anderson PowerPole shells and pins (one set has been provided with your
LumenDim6), and a crimping tool for those pins.
Anderson PowerPole Connectors
PowerPole shells are available in a range of colors. Pins are available with
15A, 30A, and 45A ratings. If you are running your LumenDim6 at close to the
maximum rated power handling, you MUST use 45A pins at the power input.
Do not exceed 45A in total for the 6 combined dimmer loads.
Each dimmer output can deliver up to 10A of dimming power, but you cannot
run all 6 channels at 10A because this exceeds the input power limit. If all
channels are loaded equally, the maximum load per channel is 7.5A.
The legend on the back of your LumenDim6 provides part numbers of
commonly used shells and pins. A complete set of shells and pins is also
available directly from RC4 Wireless.
