RC4 Wireless LumenDim6 Quick Start Manual Download Page 14

14

Advanced Features

The LumenDim6 is a multifaceted device for users of all experience levels. The 

features below can be explored further at 

http://rc4.info/ 

or by asking us for 

help at 

[email protected]

:

• 

Using a small adaptor cable, the LumenDim6 can be used as a wireless data 

receiver to deliver DMX to other devices.  It can also be used as a wired 

DMX dimmer: the miniplug DMX port becomes an input when the device is 

not linked to a transmitter.

• 

When using the LumenDim6 for cinema (motion picture capture), PWM 

frequencies can be adjusted for the smoothest dimming without banding or 

other camera artifacts.

• 

The LumenDim6 has a wide variety of dimmer curves that can ring 

telephones and more (using DimC, D, E, and F).

• 

Usi

ng the RC4 Flkr Effects Engine

, you can create many unique effects 

including candle flicker, analog tv screen noise, welding spark, and much 

more.

• 

An HSL (Hue/Saturation/Level) processor can be enabled, making it easy to 

find a specific color and dim it up and down without color variation.  

14

Summary of Contents for LumenDim6

















Reviews: