13
13
Choosing Other Dimmer Curves or Profiles
The LumenDim6 default is the ISL dimmer curve, which is best for LEDs. This is
also the curve that is selected with RC4 OneTouch™ when the DMX level is at
30%.
There are dimmer curves for different kinds of lamps, motors, and more.
Detailed information can be found online by searching dimmer curves at
http://rc4.info/
.
The most common curves are selected using these DMX channel levels and
RC4 OneTouch™ with the Set buttons as outlined on page 9:
Non-Dim 100%
(80% or higher)
Use for relays, solenoids, air valves, etc.
Linear 70%
(60 - 79%)
For incandescent, halogen, tungsten lamps.
ISL Fast
50%
(40 - 59%)
For LEDs when fast blinks and flashes are required.
RC4 Digital Persistence™ is disabled.
ISL Slow
30%
(20 - 39%)
Best for typical LED applications, with RC4 Digital Persistence™.
For super smooth 19-bit dimming. (default setting)
