RCM Signal User Manual
(Version 2.0.1.1)
Page
16
6.2.8 Settings/Race finished
The settings for the finish of a race are made here.
The function for 5 different conditions can be set. In the left column the time before
end is set, at which the function is executed. Below the channels K1 to K8 the lights
will be activated., which will be switched on or of.
The column “Aktiv” must be activated, that the function is performed. The Columns
N, P and F mean:
N = normal persistent light
P = short one time flashing
F = continuous flashing
The column “I” is only active if P or F is activated. When I is actiovated, the
functions is performed interleafed. This means, that the previous function is
performed furthermore. The set lights/channels remain on or off, the setting of a
flashing is performed in addition.
6.2.9 Settings/Idle Mode
Here the signals are set, which will be displayed, when no race is in progress.
Summary of Contents for RCM Signal
Page 1: ...User Manual RCM Signal ...
