RC-Timing RCM Signal, User Manual

Page: 9 / 21

RCM Signal User Manual
(Version 2.0.1.1)
Page 9
In RCM Signal you choose Configuration/Options.
In this windows you mark on the left column Network and type the IP-Address you
have found in RCM Ultimate into the field TCP/IP-Address.
Please leave the number of the TCP/IP Port at 30002. Only with this port RCM
Signal is able to receive the necessary information from RCM Ultimate. Confirm
your settings by clicking Ok. Now the footer line changes to “Connected to RCM-
Signal Interface” and the color of the bar will change to white. Please consider,
that it can take several seconds until RCM Signal has found the connection to RCM
Ultimate. In the footer line of RCM Ultimate you will find the information “Signal:
1”.
If RCM Signal can not establish a connection your network may be does not work
properly. To check this, please open a Command Shell and type in PING <ip-
adresse> (for example PING 255.255.255.158). If you got an error message (time
limit exceeded), your network is not working properly and you have first to check
the connections.